Do you want to know how to install vinyl car wrap? Then you’ve come to the right place.
When installing vinyl car wrap, the most common issues you need to avoid are crooked, crinkled and bubbly wraps. As car wrap specialists, Procloud Signage knows the best methods for how to install vinyl car wrap. Here are some key tips from the professionals.
Vinyl Car Wrap Brisbane Tips
1. Start with a Plan
The first thing you need to do is have a plan. You should choose the quantity and type of car wrap for the project. Make sure you choose top quality materials to ensure the durability of the vinyl.
Before buying the vinyl wrap, you should measure the panels you want to cover. Once you have got the width and length measured, get their surface areas to determine the amount of material you will need for each panel.
After getting the area for all panels, add them together to calculate the total surface area. Then add 1 square metre for spoilage. That’s the total vinyl wrap you need for the project.
When it comes to vinyl car wraps, you get what you pay for. Avoid getting cheap materials if you want to preserve your paint job and the lifespan of your wrap. High-quality materials are more durable and keep their colour longer.
2. Gather Tools Required for Vinyl Car Wrap Installation
If you want to know how to install vinyl car wrap properly, you need to have the right tools for the task first. These may include the following:
- Cutting tape
- Measuring tape
- Infrared thermometer
- Cleaning solution
- Cutting blade
- Heat gun.
3. Prepare the Car
Cleaning the car before the application process is something you should do. The surface must be free of dust, dirt, and debris. Remove any residue with the use of a degreaser. Then apply 70 percent isopropyl alcohol on the same spot.
It is important to keep the work area clean as well. Before preparing the car, make sure you sweep the area so that dust and other debris doesn’t go back onto your car.
After cleaning the car, wear gloves and run your fingers on the surface. Look for scratches, bumps, and chips. You may need to repair or fill those areas first because vinyl wraps require a smooth surface.
4. Installation of Vinyl Car Wrap
The next step is to cut the vinyl wrap. Make sure you add some allowance to the edges of each piece. The more vinyl to work with, the easier it will be for you.
Make sure that the surface is clean before applying the wrap. It is advisable to have another set of hands to help you with this step. Remove the backing and place it over the panel. The vinyl will not adhere to the surface unless you apply pressure to it.
Use the squeegee to press down the vinyl wrap. Start from the centre going to the edge to ensure that the material is smooth. The wrap is flat if there is no air trapped between the material and the surface. If there are bubbles, you should push the air out.
Use the heat gun before making cuts to make sure that you can lift the material off the surface when needed.
5. Trim and Tuck the Edges
Once you have placed the wrap on the surface, the next step is to cut the excess material. Be careful when cutting vinyl so that you don’t damage the paint underneath it.
After trimming, you can now start tucking away the edges. It might sound easy, but you should pay attention to the smallest details to ensure the car wrap looks good. Make sure you don’t stretch the vinyl too much. You should also avoid overheating the material to prevent reducing its durability.
6. Heat the Vinyl Car Wrap
The last step is to heat the surface. If the car wrap pops up or curls, then you need to reapply the vinyl in that area.
Once the car wrap is smooth, you can clean it.
Vinyl Car Wrap Brisbane Experts
As you can see, doing your own vinyl car wrap can be a tedious and detailed process. If you want to know how to install vinyl car wrap, it may be better to consult an expert and have them do the job for you.
For high-quality vinyl car wrap at competitive rates, contact Procloud Signage today!